Ultra-1 Specialty One Piece 2 Layer SFI 3.2A/5 Suit

Pyrotect
$799.95 - $969.95
(No reviews yet)
Weight:
6.00 LBS
Width:
20.00 (in)
Height:
15.00 (in)
Depth:
4.00 (in)
Current Stock:
Adding to cart… The item has been added

 

The Pyrotect Ultra-1 One Piece Suit is the industries gold standard for SFI rated suits! The Pyrotect Ultra-1 is Pyrotect’s top of the line driving suit. The Pyrotect Ultra-1 race suit is comfortable, stylish and lightweight.

Available Colors: Black/White, Gray/White, White/White, Green/White, Yellow/White, Orange/White, Red/White, Pink/White, Purple/White, Blue/White

Specialty Suits are made to order and will take 6-8 weeks for delivery unless you choose to rush order it in 4-6 weeks (+$150)

Features:

  • SFI Approved 3.2A/5
  • 360 Degree Arm Gussets
  • Flexible Back Panel
  • Boot Cut Leg
  • Contrasting Box Quilt stitching for a stylish and more durable suit
  • Available in Black, Gray, White, Green, Yellow, Orange, Red, Pink, Purple, Blue
  • Sizes S through 5XL

 

  Size Chest Waist Shoulders Trunk Sleeve Inseam Height Weight
  SM 36-38 29-33 17½ 28½ 31 29 5'5"-5"8" 115-130
  MD 38-40 32-35 18 29½ 33 30 5'7"-5'10" 130-145
  M/L 40-43 34-37 18½ 30½ 34 31 5'9"-6'0" 145-175
  L 43-46 36-39 19 31½ 34½ 32 5'10"-6'2" 175-200
  XL 45-48 39-43 19½ 32½ 35 32 5'10"-6'2" 195-225
  XXL 48-50 42-46 20 33 35 32 5'10"-6'2" 225-245
  XXXL 54+ 50+ 23 34 35 33 5'10"-over 245-up
Suit Measurement Data
1) Have measurements made by a tailor or sewer.
2) Take Measurements over tee shirt and comfortable pants, belt must be horizontal and even with top of hip bone 1-1/2" below belly button.
3) Make all measurements using cloth tape to center of belt.
4) Show exact measurements. We will add "ease" as required.
BE SURE to take all measurements over well-fitting underwear; DO NOT measure over baggy clothes.
WARNING:Any fire retardant suit is minimal protection at best. All suits should be used with fire retardant underwear for increased fire protection. BEFORE wearing any suit for the first time, it is IMPERATIVE to dry clean or wash to insure it's fire rating. During manufacture of the materials, chemical residue, starch, dyes and contaminants are introduced. Failure to clean first may cause skin rash, itching, color transfer, and reduced fire protection. After each use, suit should be cleaned following instructions, and stored in a lint free container. Any oil or grease stain lowers ratings significantly. To preserve colors, keep suit out of direct sunlight whenever possible.
SAFETY RECOMMENDATIONS: No driver, crew worker or spectator should be allowed near any fuel source unless wearing ONLY 100% cotton or wool apparel. ANY man-made material (polyester, acrylic, etc.) will burn and melt into the skin (requiring skin grafting). This is especially important in underwear, socks and gloves. We now place labels under the epaulets or low on the waistband of our suits for this reason, and their location must be pointed out to technical inspectors. Plastics should be avoided in shoes and gloves.

WARNING:
RACING IS A HAZARDOUS SPORT. NO WARRANTY IS MADE OR IMPLIED REGARDING ANY PRODUCT MANUFACTURED OR SOLD BY PYROTECT TO PROTECT USERS FROM INJURY OR DEATH. THE USER ASSUMES ALL RISKS.